• NL
  • EN

 CALL US: +31 (0)45-5748190     |

You are here

PCAP Touch by Zytronic®

This manufacturing technology is unique to Zytronic and offers significant benefits to electronic display manufacturers. The touch-sensing layer consists of an array of micro fine wires that are not visible on a powered display.

Unlike other touch sensors using a capacitive system where the sensing medium is on the surface of the touch panel, the active component of the ZYTOUCH® sensor is embedded for protection – and can be up to 20mm from the touch surface.

Not only does this technology produce a highly dependable, rugged vandal resistant and low-maintenance system, it also offers unrivalled protection against a wide range of physical threats – a cost effective solution for the most demanding touch sensor applications.

Summary of Benefits:

  • Excellent readability – light transmission of up to 91% through a standard sensor.
  • Rugged vandal resistant construction, Ideal for internal and external usage – a proven solution for public access areas.
  • Excellent optical clarity – the sensor can be enhanced with Zytronic’s range of optical coatings and filters.
  • Accuracy – less than +/- 1.5% of reported position.
  • Response time – < 20ms.
  • Stability – no drift, therefore no recalibration is required.
  • Pointing device – works with gloved and ungloved finger.
  • Immunity to damage – unsurpassed impact, vandal, and scratch resistance.
  • External environments – unaffected by dirt, moisture and rain.
  • Operating temperature – ranges from –35ºC to +65ºC. Sub zero operation may be enhanced by an integrated heater panel.
  • Resistance to contamination – unaffected by harsh cleaning fluids.
  • Shielded filters can be specified.
  • Supports both RS232 and USB.
  • Embedded controller – further enhances reliability and life expectancy.
  • Operating systems supported – Windows® 9X, NT, ME, 2000, XP, XPe, Vista, Windows® 7, 8 & 10 (single, dual & multi touch) and Linux.

Zytronic touch sensors offer a range of benefits not available with any other touch sensor technology.

The ZYTOUCH® touch sensor comprises a laminated glass sensor, which encompasses the sending medium, and the control card which connects to the communications port of the controller.

Bank with touchscreen

The touch sensor comprises a laminated glass sensor, which encompasses the sensing medium, and the control card that connects to the communications port of the computer.

Detection Method: PCT™ and MPCT™
Power Requirements: Refer to Controller data sheet
Operating Temperature: -35°C to +70°C
Humidity: 0 to 90% RH @ 40°C. Unaffected by condensation
Speed of Response: <10 mS
Durability: Unsurpassed vandal and shock resistance
What it Detects: Finger, gloved or ungloved. Conductive stylus
Resistance to Contamination: Resistance to contamination – Sensing media protected by glass, exceeds requirements of ASTM-F1598-96
Light Transmission: 90% through standard ZYTOUCH®
Immunity to Damage: Inert glass front – sensing media is not touched by the operator. No moving parts
Stability: Use of fixed electrodes ensures one time calibration and no drift with usage or time
Glass Options: Various thicknesses, anti-glare, anti-reflective, clear, tinted, chemical or thermal toughened
MTBF (Sensor): Excellent, no known wear-out mechanism
Regulatory: CE, FCC and UL when installed in system
Sealability: Ability to be NEMA 12 or NEMA 4 compliant
Protocol: Protocol available to allow users to customise their driver design
Connectivity: Serial RS-232 or USB v1.1, compatible with USB v2.0 (refer to Controller data sheet)
General Specifications of PCAP Zytouch products can be found here:

Spec. USB controller

Specs Pcap Zytouch components

Spec. sensor

Specs Pcap Zytouch sensor
Driver downloads : Driver touchscreen Pcap Zytouch
General information : More Info